SAF and SAW pillow blocks with bearings on an adapter sleeve

Contact Now

 The most important advantages of the newly developed pillow block housings SAF can be summarized as follows: ■ The housing has higher strength due to the improved housing design, developed using modern calculation methods. This gives higher security against failure of the housing due to overload. ■ The housing material can be selected in accordance with the requirements of the application, always giving the most economical solution. ■ Stockholding is simplified with the ordering of housings in a universal design, since the housing delivery includes standard seals, locating ring, endcover and grease fitting. ■ They are suitable for spherical roller bearings 222..-K as well as for split spherical roller bearings 222S. ■ Due to the range of seal variants, the correct seal can be selected taking account of the environmental conditions. ■ Marks indicating the center of the housing as well as machined locating faces allow rapid and precise alignment of the housing. ■ Several predefined mounting points give easier mounting of sensors for condition monitoring and connection of the lubricant supply to the housing. ■ Serial numbers marked on the housing cap and base ensure that the upper and lower housing sections are correctly matched during assembly.

skf SSAFS 22528 x 4.13/16 T SAF and SAW pillow blocks with bearings on an adapter sleeve

0.023 to 0.043 mm Double Shield
43,500 N 55 mm

skf SAF 22622 x 3.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve

1.060 kg 5,300 rpm
1.5 mm 1.5 mm

skf SAFS 22524 x 4.1/8 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve

8.5 Hz 40 mm
15.07 Hz 6 mm

skf SAW 23518 x 3.1/8 SAF and SAW pillow blocks with bearings on an adapter sleeve

2.5 mm N/A
435 kN 64 mm

skf FSAF 22518 x 3.1/16 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve

350 mm SC 319 FS
SC 319 DS V110A

skf FSAF 1517 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve

UC211-32G2 22 mm
171 mm P211-
1/17