Single row tapered roller bearings

Contact Now

Single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis  to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e (from the data table): the larger the value of e, the larger the contact angle.

Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in 1898 and today offers the world's widest variety in inch and metric sizes.

In the HR series, the rollers are increased in both size and number giving it an even higher load capacity. They are generally mounted in pairs in a manner similar to single-row angular contact ball bearings. In this case, the proper internal clearance can be obtained by adjusting the axial distance between the cones or cups of the two opposed bearings. Since they are separable, the cone assemblies and cups can be mounted independently.
 

 

 

 

 

 

 

85 mm x 180 mm x 60 mm NTN 32317U Single row tapered roller bearings

SCHAEFFLER GROUP N/A
4 (1 Quadruplex Set) Open

80 mm x 170 mm x 58 mm NTN 32316U Single row tapered roller bearings

140 mm 31328XUDF
154 NTN

80 mm x 170 mm x 58 mm SNR 32316BC12 Single row tapered roller bearings

M06110 LINK BELT
N/A 0.0

75 mm x 160 mm x 55 mm NTN 32315U Single row tapered roller bearings

0 Inch | 0 Millimete 0 Inch | 0 Millimete
Roller Assembly plus Thrust Roller Spheri

65 mm x 140 mm x 48 mm NTN 32313U Single row tapered roller bearings

37 mm 160 mm
37 4284 r/min

70 mm x 150 mm x 51 mm NTN 32314U Single row tapered roller bearings

NJ222 EMA 343,000
180.5 38

65 mm x 140 mm x 48 mm SNR 32313BA Single row tapered roller bearings

0.0 N/A
SCHAEFFLER GROUP Bearings

105 mm x 190 mm x 50 mm NTN 32221U Single row tapered roller bearings

0,28 kN 12 mm
LBCR 5 5

110 mm x 200 mm x 53 mm NTN 32222U Single row tapered roller bearings

M06110 NTN
0.484 0.0

55 mm x 120 mm x 43 mm NTN 32311U Single row tapered roller bearings

42,5 mm 63
4 mm 17 mm

60 mm x 130 mm x 46 mm NTN 32312U Single row tapered roller bearings

Non-expansion Stainless Steel
5.125 Inch | 130.18 8483.20.40.40

55 mm x 120 mm x 43 mm SNR 32311.BA Single row tapered roller bearings

Concentric Collar 3/4 Inch
0 Inch | 0 Millimete 4
1/34